I have a set of 3 Bra Premiere non-stick frying pans that I’ve used for a while. The coating on them says “Teflon Innovations without PFOA”. Recently I’ve noticed that on the most used pan, the 26cm one, the Teflon coating has started to peel off.

I know that Teflon coatings can release harmful fumes and chemicals if overheated, but what about if the coating is physically peeling? Is it still safe to cook with them? Or should I stop using especially the 26cm one? I don’t want to keep exposing my family to anything dangerous unknowingly. Any advice if these types of pans are still safe to cook with if the nonstick surface is peeling would be appreciated!

  • amio@kbin.social
    link
    fedilink
    arrow-up
    22
    arrow-down
    2
    ·
    1 year ago

    What did you do to the poor thing? Looks like you’ve been stabbing it with a fork 24/7 for years. Toss it, and be (a lot) more careful with the next one - or skip nonstick entirely. They already have a finite lifetime when not abused, and if you manage to ruin the coat in one spot that’s a hotspot for “scaling off” more.

    Stainless steel can take a beating, though, go nuts.

      • amio@kbin.social
        link
        fedilink
        arrow-up
        11
        ·
        1 year ago

        Cast iron is nice, I recommended stainless because I assume someone who treats pans like this would ruin cast iron too.

        • Perfide@reddthat.com
          link
          fedilink
          arrow-up
          5
          ·
          edit-2
          1 year ago

          Cast iron is nearly impossible to “ruin”, the idea that you can is nothing more than a huge circlejerk. Even a completely rust covered cast iron pan can likely be made basically good as new with a little effort.

          Obviously restoring your pan every time you wanna use it isn’t practical, so you still wanna take care of it, but actually permanently ruining it? Good luck.

          • amio@kbin.social
            link
            fedilink
            arrow-up
            2
            ·
            1 year ago

            I wasn’t really referring to permanently mangling the iron. Taking care of seasoning is an extra thing, is all, and the seasoning can absolutely be ruined.

        • Terevos@lemm.ee
          link
          fedilink
          arrow-up
          3
          ·
          1 year ago

          It depends. I ruined my Teflon, but my cast iron is great. Mostly I just hate plastic spatulas.

      • HeartyBeast@kbin.social
        link
        fedilink
        arrow-up
        6
        arrow-down
        1
        ·
        1 year ago

        Unless of course you want to use a dishwasher. Even manually it really isn’t ‘so much easier to clean’ and you have to spend time seasoning it.

        • KrummsHairyBalls@lemmy.ca
          link
          fedilink
          arrow-up
          7
          ·
          1 year ago

          Once you season cast iron you can clean it however you want. Even with soap. The oils you bake on there at such high heat causes polymerization.

          You don’t have to continue to season cast iron after cleaning it, unless you’re cleaning it with a fucking angle grinder.

          • Perfide@reddthat.com
            link
            fedilink
            arrow-up
            1
            ·
            1 year ago

            Dishwashers can have some pretty high pressures involved, I wouldn’t be surprised if it can literally chip the seasoning off.

            • grue@lemmy.world
              link
              fedilink
              English
              arrow-up
              2
              ·
              edit-2
              1 year ago

              I might be wrong, but I think if your “seasoning” is thick enough to chip off it means you did it wrong and failed to scrub away the excess food residue.

        • PM_ME_YOUR_ZOD_RUNES@sh.itjust.works
          link
          fedilink
          arrow-up
          6
          arrow-down
          3
          ·
          1 year ago

          I have a cast iron pan that I’ve used for almost 10 years. I seasoned it when I got it. To clean it, I scrub it with steel wool, dry it off then rub a coat of oil on it. It still looks and works perfectly. Cast iron is extremely easy to clean and upkeep.

          • HeartyBeast@kbin.social
            link
            fedilink
            arrow-up
            3
            arrow-down
            3
            ·
            1 year ago

            Yeh,

            Scrubbing it with steel wool, drying it and then rubbing in oil doesn’t sound as easy as ‘put in dishwasher’. I couldn’t be doing with that, cooking for a family every day

            • PM_ME_YOUR_ZOD_RUNES@sh.itjust.works
              link
              fedilink
              arrow-up
              3
              arrow-down
              2
              ·
              1 year ago

              I cook for a family of four every day and taking 3 minutes to clean my cast iron pan is the least time consuming part of it. You’re being dramatic.

              • HeartyBeast@kbin.social
                link
                fedilink
                arrow-up
                2
                arrow-down
                1
                ·
                1 year ago

                I’m not being dramatic- I just don’t see much benefit from the faff. And I’ve never actually found a well-seasoned cast iron pan that is as non-stick as a non-stick.

                … hence the need for the wire wool, I guess.

                • PM_ME_YOUR_ZOD_RUNES@sh.itjust.works
                  link
                  fedilink
                  arrow-up
                  1
                  ·
                  1 year ago

                  Oh, my point wasn’t that a cast iron pan is as non-stick as Teflon. I was simply talking about cast iron upkeep. I have a non stick pan and it’s much better for certain things for sure. But I wash it by hand instead of putting it in the dishwasher.