I solved this problem for myself yesterday and couldn’t find the answer anywhere online (clearly stated), so here’s what I did.
This also works for Plex, games, etc it’s policy based routing so you can have your VPN and remote access at the same time.
This configuration is for your ssh server (ie your home PC) that has a VPN running like ProtonVPN etc and allows you to connect back to your home PC remotely either for SSH, plex, anything you’re serving.
This is changing the default gateway for particular ports, so that return traffic from connection attempts doesn’t go back out through the VPN.
I used this page to figure out how to do this:
http://linux-ip.net/html/tools-ip-rule.html
Add a default route to some table, arbitrarily table 10 but you can use whatever number (RTFM), also obviously needs to be your router IP
sudo ip route add default via 192.168.19.1 table 10
Add a rule for the return traffic from your ssh host
sudo ip rule add sport 22 table 10
sudo ip route flush cache
check out your fancy new rule
ip rule show
And to make this persistent across reboots, add to:
/etc/systemd/network/20-wired.network
(or whatever your file there is, add the following to the bottom. This is the same as above, just permanent)
[Route]
Gateway=192.168.19.1
Table=10
[RoutingPolicyRule]
SourcePort=22
Table=10
Finally someone who learnt how to use systemd.
learntlearning… it’s extensive!
Here, a bit more for you: https://tadeubento.com/2023/systemd-hidden-gems-for-a-better-linux/
Woooah awesome thanks!
There goes my whole day again on systemd…
deleted by creator
Yes but… I am learnING??
This (and “tyre”) is why we won the war.
We really need a ConfidentlyIncorrect community on Lemmy.
If you’re looking for more improvements, I’d recommend using a non-default SSH port and to include the destination IP in the rules.
Ahead of you with the non-default port, I just didn’t use it in the example.
But for the destination IP, I won’t always be connecting remotely from the same one. Or am I misunderstanding what you mean?
Aha, I think I misunderstood your situation then? I assumed you’re running these routing rules on your client machine, so you’re able to access your ssh server without it going over the VPN – not that your server is running a VPN active that blocks external connections…?
But if I didn’t misunderstand, I’d mean the (assumingly static) ssh server’s IP.
No it’s the second one; server (home pc) is running ProtonVPN and there is a default route that makes all (ie ssh replies) traffic go through the VPN.
I added some clarification, but basically this sets up a port-based default route to the home router instead of the VPN, so that SSH etc works.
Out of curiosity, why not just leave ssh access to the local network so you can only reach it by VPN in the first place? Note I might be misunderstanding what the goal of this was, so feel free to lmk if I’m off the field with my question lol
I have protonVPN, therefore no way to forward packets from their endpoint to my pc.
Oh gotcha, I misunderstood this post as talking about a self hosted VPN, not external provider. That explains it! :D
Proton has port forwarding anyhow…
I was surprised to learn this was a thing, impressive, however;
‘the VPN app sends a request to the VPN server to open a random port’
‘the active port number will change when you disconnect and reconnect the VPN.’
This will not work OOTB with Plex for example, you would need to change the port in the app every time. It becomes difficult to serve anything statically, like a XMPP server or anything that doesn’t let you configure the port.
You also would need to be at home to check which port you’ve been assigned eg if the connection drops and you get assigned a new port, defeating the whole ‘remote access’ thing.
deleted by creator
Goddamn I didn’t even think of that, I spent days on an alternate solution to a problem this would’ve solved.
I spent most of the day intensely learning nftables and ulogd thinking that was the way. Nope, there was a simple way all along.
Huh. Neat!
What are you trying to achieve? I am sorry I don’t understand the end goal
Remote access while ProtonVPN is active.
