• tabular@lemmy.world
    link
    fedilink
    English
    arrow-up
    26
    arrow-down
    3
    ·
    4 months ago

    What features were lacking from mesa or Cinnamon generally?

    I have 4k 1440, 1080 monitor (120hz or higher) on Mint edge, what would I gain from switch to somethibg else?

    • 737@lemmy.blahaj.zone
      link
      fedilink
      arrow-up
      26
      arrow-down
      3
      ·
      4 months ago

      mesa is outdated by default, not supporting rx 7000 cards unless you use the edge iso.

          • n2burns@lemmy.ca
            link
            fedilink
            arrow-up
            7
            ·
            4 months ago

            Can you explain? As a Mint user with really old hardware, I appreciate using the LTS kernel. However, I also appreciate them giving users other options.

            • 737@lemmy.blahaj.zone
              link
              fedilink
              arrow-up
              6
              arrow-down
              2
              ·
              4 months ago

              there is no benefit to old lts kernels on the desktop, kernel releases are always extremely stable

    • 737@lemmy.blahaj.zone
      link
      fedilink
      arrow-up
      12
      arrow-down
      3
      ·
      4 months ago

      plasma has wayland support, tons of customizability, better multi monitor support, a great suite of applications including a text editor with lsp support and much more, and in general looks nicer. cinnamon is sort of the bare minimum

      • mihnt@lemmy.ca
        link
        fedilink
        arrow-up
        9
        arrow-down
        2
        ·
        4 months ago

        better multi monitor support

        I run a 3x1 setup and KDE didn’t handle it any better than Cinnamon did.

        Wayland support is coming to Mint. You can actually use it on 21.3 right now but it is unstable.

        Rest of what you said is opinion.

        • 737@lemmy.blahaj.zone
          link
          fedilink
          arrow-up
          5
          arrow-down
          4
          ·
          4 months ago

          Wayland has objectively better multi monitor support in every case. You were encountering tearing issues before switching, maybe you just didn’t notice.

          • mihnt@lemmy.ca
            link
            fedilink
            arrow-up
            5
            ·
            4 months ago

            Well, I got rid of KDE and I’m on Cinnamon right now, so where are these tearing issues? You think I would have noticed after over a year of use.

        • 737@lemmy.blahaj.zone
          link
          fedilink
          arrow-up
          2
          arrow-down
          2
          ·
          4 months ago

          the rest also isn’t just an opinion, cinnamon does not have an equivalent to kdenlive, krita, or kate. even the existing applications are just not on the same level. it’s an acceptable desktop, but plasma and gnome are just better.

          • mihnt@lemmy.ca
            link
            fedilink
            arrow-up
            5
            ·
            edit-2
            4 months ago

            Why would I care what software KDE comes with? This is Linux. I can install whatever works best for me. Including the whole of KDE software suite if I so chose. You KDE fans are voracious.

          • Liz@midwest.social
            link
            fedilink
            English
            arrow-up
            5
            ·
            4 months ago

            I use KdenLive on Mint whenever I need to edit a video. I’ve never bothered to look for the other two because I use Darktable and GIMP for my photo editing, but I can check to see if they’re available if you want me to.

      • tabular@lemmy.world
        link
        fedilink
        English
        arrow-up
        5
        ·
        4 months ago

        Does that include support for variable refresh rate with multiple monitor (Freesync in my case).

    • MentalEdge@sopuli.xyz
      link
      fedilink
      arrow-up
      7
      arrow-down
      1
      ·
      4 months ago

      Cinnamons compositor doesn’t turn off for games (it’s supposed to but has been bugged for years) which costs you fps.

      Playing Alan Wake 2 at launch was only possible with the latest Mesa drivers compiled from the AUR due to some graphics features that it required.

      • TimeSquirrel@kbin.melroy.org
        link
        fedilink
        arrow-up
        8
        ·
        edit-2
        4 months ago

        It doesn’t just cost FPS. It straight up breaks some games that run fine on other distros.

        Does it still have that feature that kills and restarts cinnamon when memory leaks start getting to be too much? I honestly had to laugh at that when that was introduced.

        • MentalEdge@sopuli.xyz
          link
          fedilink
          arrow-up
          5
          ·
          4 months ago

          No clue. Haven’t used it in years. I was done when I went looking for a fix for the compositor thing and found a years-old open bug report.

      • tabular@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        4 months ago

        I assume compiling Mesa is rather difficult to set up? For reference I’ve not bothered to try and compile Lutris or Wine.

        • MentalEdge@sopuli.xyz
          link
          fedilink
          arrow-up
          3
          ·
          edit-2
          4 months ago

          With AUR it’s as easy as installing any other package, actually.

          You just install the git version from AUR.

          • tabular@lemmy.world
            link
            fedilink
            English
            arrow-up
            1
            ·
            4 months ago

            Installing Arch appears to be more complex than Mint’s Click Yes x4 GUI. Should I expect almost everything to just work after install?

            • MentalEdge@sopuli.xyz
              link
              fedilink
              arrow-up
              1
              ·
              edit-2
              4 months ago

              Not even close, if you actually install barebones arch, then barebones arch is exactly that, barebones. You wont even have a DE.

              Endeavour is what you want. It’s just straight up arch, but with all the stuff you’d want to set up anyway done for you.

              And if you want an “app-store” style app to browse packages with, and not fiddle with the command line to manage packages, install pamac. It can be expanded with AUR and flatpak support.

              • tabular@lemmy.world
                link
                fedilink
                English
                arrow-up
                1
                ·
                4 months ago

                If I knew what parts I most wanted then maybe I could do bare arch but I guess Endeaver is the way to ho.

                • MentalEdge@sopuli.xyz
                  link
                  fedilink
                  arrow-up
                  1
                  ·
                  4 months ago

                  Well, Endeavour is just arch. If you want, you can achieve the same install that has only the things you need, by removing things instead of just adding.

                  IMO it starts off closer to the config most people want, so it’s less work to take it the rest of the way.

        • nyan@sh.itjust.works
          link
          fedilink
          arrow-up
          1
          ·
          4 months ago

          Looks like mid-to-high-level difficulty if you really want to build from source, due to multiple complex interdependent configuration flags that have to match your hardware, and the need to check a kernel option or two. (Based on the Gentoo ebuild for mesa 24.1.2).