Context:

I updated my system last night (EndeavourOS) and it looks like the kernal didn’t update correctly. When I restarted the system and entered my password for the encrypted drive, I get an error:

[FAILED] Failed to mount /efi
See 'systemctl status efi.mount` for details.

I can’t remember the commands I used last night but I was able to check the version of the kernel I am using currently - uname -r I believe - and what is installed. There was a difference in versions.

Trying to fix the problem:

I attempted to chroot into the system via a live USB - tutourial, arch bbs & arch wiki.

However, when trying to mount the drive (/dev/sda2) I get an error message: mount: /rescue: unknown filesystem type 'crypto_LIKS'. I tried using cryptsetup luksOpen’ and ‘udisksctl unlock -b’ but both return a similar error saying it is not an encrypted device. See fdisk -l results below:

[liveuser@eos-2024.04.20 ~]$ sudo fdisk -l
Disk /dev/sda: 238.47 GiB, 256060514304 bytes, 500118192 sectors
Disk model: TOSHIBA KSG60ZMV
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: FC41E181-15E3-4444-8240-E68D52AFD07E
 
Device         Start       End   Sectors   Size Type
/dev/sda1       4096   2052095   2048000  1000M EFI System
/dev/sda2    2052096 481648511 479596416 228.7G Linux filesystem
/dev/sda3  481648512 500103449  18454938   8.8G Linux filesystem
 
 
Disk /dev/sdb: 57.3 GiB, 61524148224 bytes, 120164352 sectors
Disk model:  SanDisk 3.2Gen1
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x7498467c
 
Device     Boot   Start     End Sectors  Size Id Type
/dev/sdb1  *         64 5249887 5249824  2.5G  0 Empty
/dev/sdb2       5249888 5575519  325632  159M ef EFI (FAT-12/16/32)
 
 
Disk /dev/loop0: 2.35 GiB, 2520530944 bytes, 4922912 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes

Snapper Snapshots:

I recently setup snapshots with Snapper since I’m using BTRFS. From what I understand, I can just roll back my system to before the system update (it takes a snapshot before and after installing anything) but I got confused on how to do that last night - troubleshooting at 2AM with a lack of sleep will do that…

What is the best way forward? I’m happy to provide more information if it helps.

EDIT: Output of lsblk

[liveuser@eos-2024.04.20 ~]$ lsblk -f
NAME   FSTYPE      FSVER            LABEL       UUID                                 FSAVAIL FSUSE% MOUNTPOINTS
loop0  squashfs    4.0                                                                     0   100% /run/archiso/airootfs
sda                                                                                                 
├─sda1 vfat        FAT32                        0BC7-CF22                                           
├─sda2 crypto_LUKS 2                            5c6d5430-3706-48e8-bffb-f680d8c19dda                
└─sda3 crypto_LUKS 2                            81a912d5-fb81-40ed-a60f-0af27314b661                
sdb    iso9660     Joliet Extension EOS_202404  2024-04-20-15-57-10-00                              
├─sdb1 iso9660     Joliet Extension EOS_202404  2024-04-20-15-57-10-00                     0   100% /run/archiso/bootmnt
└─sdb2 vfat        FAT16            ARCHISO_EFI 7156-9697

EDIT 2:

[liveuser@eos-2024.04.20 ~]$ lsblk -a
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINTS
loop0    7:0    0   2.3G  1 loop /run/archiso/airootfs
sda      8:0    0 238.5G  0 disk 
├─sda1   8:1    0  1000M  0 part 
├─sda2   8:2    0 228.7G  0 part 
└─sda3   8:3    0   8.8G  0 part 
sdb      8:16   1  57.3G  0 disk 
├─sdb1   8:17   1   2.5G  0 part /run/archiso/bootmnt
└─sdb2   8:18   1   159M  0 part 

# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a device; this may
# be used with UUID= as a more robust way to name devices that works even if
# disks are added and removed. See fstab(5).
#
# <file system>             <mount point>  <type>  <options>  <dump>  <pass>
UUID=0BC7-CF22                            /efi           vfat    fmask=0137,dmask=0027 0 2
/dev/mapper/luks-5c6d5430-3706-48e8-bffb-f680d8c19dda /              btrfs   subvol=/@,noatime,compress=zstd 0 0
/dev/mapper/luks-5c6d5430-3706-48e8-bffb-f680d8c19dda /home          btrfs   subvol=/@home,noatime,compress=zstd 0 0
/dev/mapper/luks-5c6d5430-3706-48e8-bffb-f680d8c19dda /var/cache     btrfs   subvol=/@cache,noatime,compress=zstd 0 0
/dev/mapper/luks-5c6d5430-3706-48e8-bffb-f680d8c19dda /var/log       btrfs   subvol=/@log,noatime,compress=zstd 0 0
/dev/mapper/luks-81a912d5-fb81-40ed-a60f-0af27314b661 swap           swap    defaults   0 0
tmpfs                                     /tmp           tmpfs   defaults,noatime,mode=1777 0 0

EDIT 3:

I think I have fixed it. I have chrooted and am busy running sudo pacman -Syu

EDIT 4: /efi still fails to mount.

  • MsFlammkuchen@lemmy.blahaj.zone
    3·
    8 months ago

    It looks like /dev/sdb2 is your efi partition. Your disk names probably got swapped. It might be worth to switch to UUIDs. lsblk -f gives you your filesystem types and UUIDs for your partitions.

    Edit: This is incorrect.

    • felsiq@lemmy.zip
      2·
      8 months ago

      sdb looks like the bootable USB to me - /dev/sda1 should be the system’s EFI, no? OP, could you try mounting that one (shouldn’t be encrypted afaik) and/or post the output of cat /etc/fstab? Edit: just realized you were unable to mount the encrypted drive in the first place so /etc is inaccessible, sorry

      • MsFlammkuchen@lemmy.blahaj.zone
        3·
        8 months ago

        You’re right. /dev/sda1 is the efi partition for the hard drive. I would still be interested in the output of lsblk -f to see what it says about the file system type.

      • governorkeagan@lemdro.idOPEnglish
        1·
        8 months ago

        I was able to get the output via Emergency Mode as the root user.

        # /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a device; this may
# be used with UUID= as a more robust way to name devices that works even if
# disks are added and removed. See fstab(5).
#
# <file system>             <mount point>  <type>  <options>  <dump>  <pass>
UUID=0BC7-CF22                            /efi           vfat    fmask=0137,dmask=0027 0 2
/dev/mapper/luks-5c6d5430-3706-48e8-bffb-f680d8c19dda /              btrfs   subvol=/@,noatime,compress=zstd 0 0
/dev/mapper/luks-5c6d5430-3706-48e8-bffb-f680d8c19dda /home          btrfs   subvol=/@home,noatime,compress=zstd 0 0
/dev/mapper/luks-5c6d5430-3706-48e8-bffb-f680d8c19dda /var/cache     btrfs   subvol=/@cache,noatime,compress=zstd 0 0
/dev/mapper/luks-5c6d5430-3706-48e8-bffb-f680d8c19dda /var/log       btrfs   subvol=/@log,noatime,compress=zstd 0 0
/dev/mapper/luks-81a912d5-fb81-40ed-a60f-0af27314b661 swap           swap    defaults   0 0
tmpfs                                     /tmp           tmpfs   defaults,noatime,mode=1777 0 0
        • felsiq@lemmy.zip
          2·
          7 months ago

          Well your /efi entry looks right to me - maybe try mount -a (maybe capital A, going off memory here but whichever option is all) and watch for error messages or check dmesg?

    • governorkeagan@lemdro.idOPEnglish
      1·
      8 months ago
      NAME   FSTYPE      FSVER            LABEL       UUID                                 FSAVAIL FSUSE% MOUNTPOINTS
loop0  squashfs    4.0                                                                     0   100% /run/archiso/airootfs
sda                                                                                                 
├─sda1 vfat        FAT32                        0BC7-CF22                                           
├─sda2 crypto_LUKS 2                            5c6d5430-3706-48e8-bffb-f680d8c19dda                
└─sda3 crypto_LUKS 2                            81a912d5-fb81-40ed-a60f-0af27314b661                
sdb    iso9660     Joliet Extension EOS_202404  2024-04-20-15-57-10-00                              
├─sdb1 iso9660     Joliet Extension EOS_202404  2024-04-20-15-57-10-00                     0   100% /run/archiso/bootmnt
└─sdb2 vfat        FAT16            ARCHISO_EFI 7156-9697

      I’ve added it to the original post as well.

  • bloodfart@lemmy.ml
    3·
    8 months ago

    What does lsblk say?

    E: uhh, let me be clear, use lsblk to figure out what the name of your encrypted volume is then append it to the unlock commands. You have to specify both the physical device (/dev/sda2?) and the encrypted volume name.

    • governorkeagan@lemdro.idOPEnglish
      1·
      8 months ago
      [liveuser@eos-2024.04.20 ~]$ lsblk -f
NAME   FSTYPE      FSVER            LABEL       UUID                                 FSAVAIL FSUSE% MOUNTPOINTS
loop0  squashfs    4.0                                                                     0   100% /run/archiso/airootfs
sda                                                                                                 
├─sda1 vfat        FAT32                        0BC7-CF22                                           
├─sda2 crypto_LUKS 2                            5c6d5430-3706-48e8-bffb-f680d8c19dda                
└─sda3 crypto_LUKS 2                            81a912d5-fb81-40ed-a60f-0af27314b661                
sdb    iso9660     Joliet Extension EOS_202404  2024-04-20-15-57-10-00                              
├─sdb1 iso9660     Joliet Extension EOS_202404  2024-04-20-15-57-10-00                     0   100% /run/archiso/bootmnt
└─sdb2 vfat        FAT16            ARCHISO_EFI 7156-9697

      Would I be able to append the UUID?

        • governorkeagan@lemdro.idOPEnglish
          1·
          7 months ago
          [liveuser@eos-2024.04.20 ~]$ lsblk -a
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINTS
loop0    7:0    0   2.3G  1 loop /run/archiso/airootfs
sda      8:0    0 238.5G  0 disk 
├─sda1   8:1    0  1000M  0 part 
├─sda2   8:2    0 228.7G  0 part 
└─sda3   8:3    0   8.8G  0 part 
sdb      8:16   1  57.3G  0 disk 
├─sdb1   8:17   1   2.5G  0 part /run/archiso/bootmnt
└─sdb2   8:18   1   159M  0 part

          EDIT:

          I was able to chroot into the drive. The drive was unlocked as /dev/dm-0.

            • governorkeagan@lemdro.idOPEnglish
              1·
              7 months ago

              Yes and no. Initially it was unlocked because I mounted and unlocked it via Dolphin. The second time round I was able to unlock and mount it with udsiksctl

  • Para_lyzed@lemmy.world
    2·
    7 months ago

    Are you able to manually mount the EFI partition while chrooted? Running an update won’t fix the problem if you don’t have the EFI partition mounted properly. To that end, are you able to manually mount the EFI partition at all? That would be a very big problem if not.

    While chrooted, try the following before updating:

    mount /dev/sda1 /efi

    I’m a bit confused by the partitioning scheme, as I don’t see a /boot mount, are the files usually stored in /boot stored in /efi here? Usually the EFI partition only contains EFI binaries. Unless perhaps your /dev/sda3 is a LUKS encrypted boot partition? Sorry, I’m not very familiar with Arch, it’s strange to me to not see a /boot mountpoint in the /etc/fstab

    It may be a good idea to just roll back the snapshot if none of this works, though that will only change the btrfs partition, so it won’t fix any issues inside the EFI partition if there are any issues there. Here’s an article about how to do that with btrfs.

    • governorkeagan@lemdro.idOPEnglish
      1·
      7 months ago

      It was causing me too much of a headache to try troubleshoot and fix that I decided to wipe the drive. I’ve got Fedora Silverblue running on the machine now. Thanks for the help!

      • Para_lyzed@lemmy.world
        2·
        7 months ago

        Great choice, I’m running Kinoite (Fedora Atomic KDE) myself! The atomic nature of the distros make them less prone to breakage, and much easier to recover from (since you can just roll back to the previous branch instead of restoring a BTRFS snapshot).

  • Wilmo Bones@lemmy.worldEnglish
    1·
    7 months ago

    Per this article from EndeavourOS discovery I was able to repair my similar issue.

    https://discovery.endeavouros.com/system-rescue/arch-chroot/2022/12/

    However my device wasn’t encrypted. However near the bottom are instructions if you are and they don’t quite match what you said you did. Maybe give it a try?

    "Encrypted installs In case /dev/sda2 is the encrypted root partition you need to unlock:

    sudo cryptsetup open /dev/sda2 mycryptdevice

    It will ask for your LUKS passphrase and unlocks the device into the path /dev/mapper/mycryptdevice

    This path can be used to mount the device:

    sudo mount /dev/mapper/mycryptdevice /mnt

    Followed by mounting the ESP (EFI-System-Partition) into the already mounted system:

    sudo mount /dev/sdXn /mnt/efi

    where in all cases /dev/sdXn needs to be changed according to what is used on your install as partition/device path and the mount path for the ESP needs to get changed according to your installed system in case. If it is /efi you need to mount on /mnt/efi if it is /boot/efi it would be /mnt/boot/efi …"