I concur about rechargeables - it doesn’t seem common for devices that take AA or AAA to have a battery gauge and it would be nice to be able to check the level on my rechargeables stock so I can know if I should top them off without needing to put each of them into the charger.

First I’ll say, if you aren’t able to boot a windows installer off of a flash drive (and nothing’s wrong with your flash drive and you created it without errors and there isn’t a setting in bios preventing you from booting it like disabled USB boot) then it could be a hardware issue that Linux won’t fix (it’s not clear how you tried to reinstall windows). But if you’re able to get to the windows logo or the menu for safe mode then it sounds like it “POSTs” (gets past showing the bios screen) and windows should be reinstallable. In short, I think it’s unlikely to be a problem that only Linux can fix if you want to stick with windows.

That said, if you are otherwise interested in trying Linux and create a USB installer, most will allow you to exit the installer or choose to go into a temporary “live desktop” where nothing is saved, so it’s a good opportunity to try out how that distro feels to use - just don’t save anything important. And if you do end up installing either OS, you can use that “live mode” to use programs to back up any files from your main hard drive to another plugged in drive.

It’s from the Onion! The artist is Ward Sutton but he’s drawing the comics from the point of view of a character named “Kelly” who is a parody of an old right wing guy (according to the Internet) who hates political correctness, hence the exaggerated scenarios in the comics. The “haha yes” sickos guy (who I guess sometimes shows up in a thought bubble) usually feels like a parody of how the right views various left wing policies in that the comic overplays / exaggerates the disastrous effects of said policies (to make fun of how absurd those fears are) while the “leftist sickos” cheer on the disastrous results.

The comics basically make fun of how extremely the right views progressive policy and the sickos guy is kind of pointing out how absurd it is to view someone as bad faith (ie a sicko knowingly cheering on the disastrous effects of a progressive policy) who supports something as simple as green energy, drug legalization, or bike lanes. It’s fun to use as a reaction image to anything progressive happening because obviously wanting something like for example affordable healthcare obviously doesn’t make you a sicko. (Or in this case wanting a terrible person to actually face actual legal consequences for the harm they’ve done)

Does the other iOS user have 18? I’m the 1 android user in a 3 person group chat and I’m wondering if I should try to get one of them to update.

Yes I do this. Same exact library folders so I can let my friends use whatever they prefer. If everything is named in a Plex friendly way it should just work in jellyfin.

My main complaint is when it decides to just stop casting to Chromecast in the middle of episodes randomly - then I have to open the app, reconnect, and resume.

Also I find the Chromecast controls stop responding frequently making it so I can’t pause what I’m watching - it’ll like disconnect from the Chromecast but keep playing.

My partner also complains about lots of bugs on the iOS app.

I would just accept the terms and disable wifi, or if you don’t want to double nat just use a switch and accept the terms / login on every device connected to the switch.

Is running a pds really equivalent to running your own instance? As I understand it, 2 friends running their own pds cannot federate without the centralized relay which still can’t be self hosted.

I hope they get wrecked and the company gets imploded

I wonder if this is related to sync having the same issue. I frequently find threads with 5-10 comments but nothing shows up. I don’t have anybody blocked whatsoever and the issue happens on posts from various instances, even my own. Maybe this could be a bug that affects both apps. When I load these threads in browser it looks fine.

I can’t wait until the immich photo editor gets enabled and hopefully it eventually duplicates all the google photos editor features because that’s the only reason I keep around the google photos app.

Probably because he already did an nft collection apparently, according to the article.

I’m glad to clear it up! It’s a super powerful tool, and I still occasionally skip the automation and just use it for manual searches since it reduces that process to a single click to search all configured torrent sites and a single click to download and have the rest automatically handled.

Before when I was visiting friends and wanted to quickly add something to plex, I used to need remote access to my torrent client and separate remote access to my NAS filesystem to move/rename files when downloads finish which was a really manual process. Now all I need is the reverse-proxied sonarr/radarr UI since it handles moving/copying/renaming on download completion - and while the UI isn’t mobile-first, it’s very usable and feels less error-prone than moving/renaming files remotely using a file explorer app.

I mean yeah there’s a lot of stuff it does, but you can pick and choose what you want to use it for so it depends on what you would find useful - you don’t have to use the full automation. I started just by using it as a read-only way to see what movies I had and in what qualities and keep things organized. You can use it as a manual interface to do one-off downloads - basically just as an interface to search 5 torrent sites in 1 place where you are still picking exactly what you want it to download. You can use it only to rename files to a consistent format. So there are a lot of ways to use the various features of sonarr/radarr besides automatic downloads. You’re not forced to go all-in and out of the box it doesn’t start automatically downloading until you enable that.

I think it’s a common misconception that if you use sonarr/radarr you have to use download automation and set up trackers but it’s not the case. It’s a useful library organization tool even if you don’t ever have it download anything.

Man that sucks. I must have gotten lucky or something with my setup. I also have trackers go unavailable all the time but I enabled 8 different ones and usually multiple will have the same torrent so it usually has no problem finding something even if 1 or 2 are down. I also don’t VPN tracker searches, just my BitTorrent client so flaresolverr seems to work fine for me (I only have it enabled for 2 of my trackers since most of the ones I use don’t seem to require it).

If you end up trying it out again I would look into the quality settings and make sure you’re not using the remux quality profile (edit: apparently the default 1080p quality profile has the 1080 remux quality enabled so this might have been the problem). By default most of the quality profiles seem to limit at 100MB/min, so a 2 hr movie shouldn’t allow anything over like 12GB. Whenever I tweak quality or custom formats I refer to trash guides which has a lot of battle-tested rules you can copy. I have my main quality profile set to only download qualities between hdtv720 and br1080 (which is just below remux) with custom formats copied from trash guides set to prefer hevc with surround sound since I have 5.1.

Lmao that greentext was literally me before I finally set up arrstack. One of the best investments of my time, it has definitely paid off over many years of just having things automatically download.

Edit: of course the below only applies to chrome and possibly chrome derivatives - FF is keeping MV2

It’ll make it a lot more likely that YouTube ads will get through because MV3 limits the block list size to a fraction of the size normally used by uBO and also disallows external/live updates to the block list, instead forcing the rules to be baked into the extension. Meaning an update to the blocking rules could take a week of extension review time to go through. I heard that the YouTube ad blocking rules can update multiple times a day so this would easily allow Google to update their ad code before approving updates to ad blockers, allowing them to always stay ahead.

So it might not outright break it, but some rules will have to be left off so it seems like it’ll be a dice roll if you get an ad where the blocking rule had to be left off to fit Google’s block list limit or the rule you have is stale because it took a couple weeks for the extension update to be approved on the extension store.

The feature of MV3 that enables these changes is that in MV3, the extension is handing over the complete blocklist to chrome, which does the blocking and gets to put limits on the blocklist. In MV2, the extension is given a direct hook to do the blocking itself, so it can have an unlimited block list size and can source the blocklist from anywhere. Think of it kind of like the difference between letting a graduation speaker speak off the cuff vs the school reviewing the speech beforehand and having their finger on the mic switch in case you wander off script. So the new system technically can be more secure and performant because the blocklist is reviewed as part of the extension and because poorly written blocker code can’t slow you down (only Google’s optimized logic is allowed to run) but it only works if they don’t impose limits lower than what effective ad blockers need (ie updating frequently like daily and allowing a large blocklist). Plus uBo is written really well for resource usage so it’s getting crippled even though it’s a shining example of an effective ad blocker.

Plus there are even more limitations like certain types of advanced rules that all I understand is just needed for certain sites that are tricky., but those rules aren’t supported in MV3. The uBo GitHub wiki has some information about this: https://github.com/uBlockOrigin/uBOL-home/wiki/Frequently-asked-questions-(FAQ)#filtering-capabilities-which-cant-be-ported-to-mv3

I like using bitwarden, the selfhosted vaultwarden server stores it with passwords and makes codes available in the app / browser extension. I also keep them backed up on a nas and synced off-site just in case.

Bro the article headline even says balcony railings. We’re talking single solar panel + plug in micro inverter type setups. That’s like $200 if you shop around.

And not sure if you’re aware, but after the “usable age” the system produces at like 80% capacity, so unless you disconnected from the grid and really really need that last 20%, you don’t need to change a thing and can keep using it way past the warranty period. Or you can add a couple extra panels. Why replace the whole thing lol.